Are you afraid of the damage to the vehicle’s paint? We need a solution that gives the paint depth gauge and removes scratches look no further than car paint correction. Let’s find out the paint correction process and its benefits to vehicle paint!
What does paint correction mean?
Paint correction is the progress of removing flaws in a vehicle’s high gloss and preserving it to a better than new condition. These imperfections are caused by swirl marks, automated car wash marring, fine scratches, water spots, etched bird droppings, tree sap, and rock chips. Paint correction entails the use of machine polishers and a variety of polishes and graded pads. A fully corrected vehicle will demonstrate only accurate reflections when viewed in direct sunlight, with no swirl marks, scratches, or blemishes visible to the naked eye.
Why should we do a paint correction for the car’s paint?
A professional paint correction will remove unsightly imperfections and restore the luster of your vehicle. A paint correction will not only eliminate scratches and marring, but it will also reinstate your car’s clear coat, giving it that perfect shine.
Paint correction can also help prolong the life of your vehicle’s paint job. The correction process and wax sealant will help extend the life of your factory paint and protect it from the elements. Your paint job will stay durable if you follow good maintenance practices after a professional car paint correction.
Can paint correction remove the clear coat?
The buffing procedure involves using a gritty substance known as a cutting compound. When you turn on the electric polisher, the polish liquid or paste is evenly distributed on the vehicle’s painted surface, causing friction to cut through the clear coat of your painted surfaces. The polishers are available in various grit levels, ranging from filling a scratch to removing the clear. If the scratch is thoroughly cut into the clear coat, it is best to seek the advice of a professional detailer or auto body repair shop before attempting to remove the damage. Protective coatings will have difficulty bonding to the surface if the clear coat is cut too thin.
The process of Paint Correction
These solutions can be completed in one, two, or three stages, with the most basic being a one stage correction. The stage that will provide the best modification for your vehicle is based on your paint’s characteristics and condition.
Stage 1 is suitable for cars with massive swirl marks, scratches, and other paint defects, and it entails three different polish and pad combinations and spot wet sanding for deeper scratches.
Stage 1 begins with a thorough wash, drying, and moving on to the clay bar step. The paint’s surface is sprayed with a special clay lubricant and then rubbed with a soft detailing grade block of clay in this process. The clay glides through the thin lubricant layer, picking up any remaining contaminants from the wash process.
When buffing and polishing are insufficient to eliminate an imperfection from a vehicle’s surface, such as deep scratches or orange peel, stage 2 is the means of extracting the top layer of clear coat with a moistened series of specially designed automotive sandpaper with excellent grit. The surface must go through a staged extensive buffing and polishing process to restore the shine.
Stage 3 paint correction is adequate for paintwork already in good condition, with no observable swirls and only minor marring. The combination of machine, pad, and polish will vary from vehicle to vehicle depending on various factors such as the level and form of clear coat, whether or not the paint is one stage, and the severity of the imperfections. The first is the most abrasive, followed by a fine finishing polish. The significant scratches are removed in the first stage of polishing, and the more delicate polish that follows removes, the more minor surface abrasions caused by the harsh polish.
What makes a paint correction impressive in Plymouth, MN?
We strive to offer high quality products and ensure your vehicle’s highest level of protection in the harsh Minneapolis climate. Humble Crew Detailing offers you three outstanding packages that fulfill your requirements and the car’s condition.
- Corrects paint up to 50%
- Increases gloss
- Removes Buffer haze
- removes water spots
Light paint correction
- 1 Step Paint correction
- Corrects paint up to 70%
- Removes light swirls
- Removes Light Oxidation
- Removes other light paint blemishes
Heavy paint correction
- Multi Step Paint correction
- Corrects paint up to 90%
- Removes heavy swirls
- Removes Heavy Oxidation
- Reduces etchings
Should we do paint correction before applying the ceramic coating?
It all depends on the state of the car’s paint. When you apply a ceramic coating, the coating’s job is to bond directly to the surface, harden, and provide a protective layer, regardless of the formulation or application method. When the coating hardens, it becomes transparent, acting like glass. The paint underneath is amplified as a result of this.
As a result, a gloss finish appears more glossy, whereas a matte finish provides depth. Any minor or difficult to see scratches will be amplified or enhanced. Any swirl marks will be visible rather than hidden. As a result, if the vehicle’s paint surface has any imperfections, it’s highly recommended that a professional detailer refine or buff the paint as part of the prep work.
Paint correction is the most critical process before applying paint protection solutions to car paint. And if you want to find a trustworthy detailing business, Humble Crew Detailing is the place to go for you! In Plymouth, MN, we provide a broad range of car detailing services with top notch technicians, cutting edge equipment, and reasonable prices. Contact us today via our website or by phone at 612-207-2685!
We are excited to serve you!